Vacuum Metallized High Gloss PET Film ( VPET-GL )
Product Introduction
Vacuum Metallized High Gloss PET Film ( VPET-GL ) has a mirror effect, higher reflectivity, good brightness. Has a good packaging and decoration effect;
Vacuum Metallized High Gloss PET Film ( VPET-GL ) has a mirror effect, higher reflectivity, good brightness. Has a good packaging and decoration effect;
Golden Vacuum Metallized High Gloss PET Film ( VPET-GL-GOLDEN ) is to coat golden color on the basis of high gloss metallized PET film, so that the appearance of the film has a silver and a golden effect, with good color and with a certain barrier. At the same time we can customize different types of golden color on high gloss metallized PET film.
1.It has the same properties as ordinary PET film, good metal bonding strength, no bubbles, wrinkles or peeling
2.Metallic luster and mirror effect. High brightness, good composite performance, can be processed with EVA, coating, stamping and other parts of composite surface after printing process.
Used for laminated paper, card and reflective requirements of billboards, traffic reflective signs (reflective road signs, reflective isolation belt, reflective car plate), reflective police uniforms, industrial safety signs, etc.



| 物性项目 Item | 测试方法 Testing Methods | 单位 Unit | 标准值 Sdandard values | ||
| 厚度Thickness | GB/T6672 | μm | 16-150 | ||
| 光泽度 | GB/T 8807 | % | 135 | ||
| 密度Density | GB/T 1033.1-2008 | ɡ/cm3 | 1.4 | ||
| 反射率 reflectivity | TS20 | % | ≥89 | ||
| 湿润张力 Surface Tension | 镀铝面 Al side | GB/T14216-2008 | mN/m | ≥52 | |
| 非镀铝面Non-Al side | ≥46 | ||||
| 断裂伸长率Elongation at break | 纵向(MD) | GB/T 1040.3 | Mpa | ≤200 | |
| 横向(TD) | ≤200 | ||||
| 拉伸强度Tensile strength | 纵向(MD) | GB/T 1040.3 | Mpa | ≥170 | ≥150 |
| 横向(TD) | ≥170 | ≥150 | |||
Important Notes:
The above data, obtained from our internal testing, is provided for reference only to assist customers in sample evaluation or product use.
The final performance of the product depends on specific production processes, and improper use may cause irreversible damage.
As equipment, processing condtions, and end-use requirements vary across manufacturers, our company shall only be responsible for the
performance of the film itself.